موضوع موحد لأصدارات بلجن ncam المطور لسيرفرات الشرينج بأنواعها لأجهزة سبارك محدث بأستمرار ان شاء الله

[م / محسن المصرى]

ncam.sh4-8.2

-[dvbapi] Limit the number of streams descrambled on extended cw
(Descrambling is now limited to 4 audio streams (there are no more than 4 audio streams in powervu channels anyway) and disabled completely for data/subtitle streams as there appear to be un-encrypted in every powervu channel. This saves CA indices and allows for more channels to be descrambled simultaneously (e.g. when doing recordings))
-[dvbapi] Stream type identification defaults to 'audio' now
(On some powervu channels starting a recording resulted in audio not being descrambled. This is a quick fix, until a better solution is found)
-fix Nagra & Nagra Merlin Tier Expire Dates
-Nagra EMM Filter merged
-completeness check of the required CAK7 keys
-aescbc removed

الملف بالمرفقات

[عزيزي الزائر يتوجب عليك التسجيل للمشاهدة الرابطللتسجيل اضغط هنا]

[م / محسن المصرى]

ncam.sh4-8.3

-[powervu] Added support for hash mode 28
-[streamserver] Better audio pid detection, similar to dvbapi
(For some stream types, parse the program element descriptors to determine whether the pid is audio or not. This way much lower cpu power will be used (no unnecessary descrambling of other stream types). This is also needed for Rosscrypt1 because the key finding algorithm depends on accurate detection of video and audio pids)

الملف بالمرفقات

[عزيزي الزائر يتوجب عليك التسجيل للمشاهدة الرابطللتسجيل اضغط هنا]

[م / محسن المصرى]

ncam.sh4-8.4

-extended fix for orf global emm
-dont disable global emms or set in config blockemm-g = 0
-caid 0x0D96 & 0x0D98

الملف بالمرفقات

[عزيزي الزائر يتوجب عليك التسجيل للمشاهدة الرابطللتسجيل اضغط هنا]

[م / محسن المصرى]

ncam.sh4-8.5

-Improvements emu
-enhance function anticascading or SIDs count
-[streamserver] Re-zero variable for every ts packet
-[streamserver] Add missing Rosscrypt1 caid to cdata
-[nemu] New config option to control SoftCam.Key linking in binary

الملف بالمرفقات

[عزيزي الزائر يتوجب عليك التسجيل للمشاهدة الرابطللتسجيل اضغط هنا]

[م / محسن المصرى]

ncam.sh4-8.6

-[powervu] Added support for hash mode 29
-[streamserver] Users can now set a fake caid for services
(Some services, while being encrypted, they don't have any caid set. Users can now add a caid for these services in the SoftCam.Key, using a special syntax)

الملف بالمرفقات

[عزيزي الزائر يتوجب عليك التسجيل للمشاهدة الرابطللتسجيل اضغط هنا]

[م / محسن المصرى]

ncam.sh4-8.7

-New patch
-Improvements emu
-Fix Auto Update Keys
-Fix some bugs
-Update a lot of files

الملف بالمرفقات

[عزيزي الزائر يتوجب عليك التسجيل للمشاهدة الرابطللتسجيل اضغط هنا]

[م / محسن المصرى]

ncam.sh4-8.8

-Improvements emu
-clean implementation of the card list
-(rarely used modules are set from default on to default off (no codechange just setup switch))
-fix reset to wrong defaults
-[nemu] Changed function declaration to a more clean way
-[streamserver] Improved Compel algorithm
(Picture is more stable now with minimum glitches only at key change (every ~53 seconds). The teletext pid is also descrambled now)


الملف بالمرفقات

[عزيزي الزائر يتوجب عليك التسجيل للمشاهدة الرابطللتسجيل اضغط هنا]

[م / محسن المصرى]

ncam.sh4-8.9

New patched
-Fixes some powerVU bugs
-insert hd03 and hd04 atr

الملف بالمرفقات

[عزيزي الزائر يتوجب عليك التسجيل للمشاهدة الرابطللتسجيل اضغط هنا]

[م / محسن المصرى]

ncam.sh4-9.0

-[powervu] Added support for hash mode 30
-insert hd03 and hd04 atr
-[dvbapi + powervu] Properly set the descrambler mode for CSA
(When watching a DES powervu channel, switching back to CSA channels required a reboot on some receivers. Other more resilient receivers just threw an error(ioctl(CA_SET_DESCR_MODE): Invalid argument), but continued to work. This was described as a bug of these receivers, but in fact it was a bug of oscam-emu. The correct mode for the CSA algorithm is CBC and not ECB! Thanks to all who helped)

الملف بالمرفقات

[عزيزي الزائر يتوجب عليك التسجيل للمشاهدة الرابطللتسجيل اضغط هنا]

[م / محسن المصرى]

ncam.sh4-9.1

-Improvement the emu
-[nemu] Fixed potential deadlock in powervu emm handling
(When the key DB contains no powervu keys, the powervu_get_hexserials() retuns 0 and the mutex in emu_get_pvu_emm_filter() is not released)

الملف بالمرفقات

[عزيزي الزائر يتوجب عليك التسجيل للمشاهدة الرابطللتسجيل اضغط هنا]